AED Cabinet Alarm System

Auto Dialer

Part # AD 2001

• Can be installed in AED Cabinet
• Can be triggered by door opening
• Power supply (transformer) plugs into standard wall outlet
• 2 voice message alarm zones
• Calls up to 4 telephones, pagers, or cell phones
• Automatically redials busy or unanswered numbers
• Built in line seizure
• Remote turn off feature allows termination of activated channel
• EEPROM memory retains program despite power loss
• Listen in verification permits 2-way voice communication
• Programming, phone line and electrical outlet placement not included

Magnetic Contacts

• N/O (Normally Open) or N/C (Normally closed) Magnetic contact can be installed in cabinet
• wires can be connected to buildings security system after cabinet has been installed
• (3 – Wire Contacts are normally used – common; normally open and normally closed)

*ALARM SYSTEM BY OTHERS

Roller Reed Ball Contact

The roller reed ball contact can be installed in the bottom of the AED cabinet to notify alarm system* that the AED has been removed from the cabinet.

Raised Platform

Part # 1403

• Platform with “valley” holds smaller AEDs in center of cabinet
• Also comes with cut out for roller reed contact
• Interior “valley” dimensions: 2-7/8 x 9” x ¾” deep

Storbe Alarm System

Part # 14SAC

• Suitable for indoor or outdoor use because of high impact polycarbonate housing
• Sounds a powerful 85dB warning sweep or hi-low horn and flashes light when activated
• Four strobe lights in each unit and comes in choice of red or clear
• Operating voltage and current rated at DC 12V and has self-contained 9-Volt alkaline power source
• Can be added to any AED cabinet as an upgrade option